Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018TAHOE FL, 4WD, GASREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASDRIVER ASSISTANCE SYSTEMSDIAGNOSTIC INFORMATION AND PROCEDURESDTC B094D OR B094E: LEFT/RIGHT SIDE OBJECT DETECTION INDICATOR CIRCUITCIRCUIT/SYSTEM VERIFICATION
2018 Chevrolet Tahoe FL, 4WD, Gas
Circuit/System Verification
2018 Chevrolet Tahoe FL, 4WD, GasSECTION Circuit/System Verification
- Ignition OFF, ignition ON.
- Verify the side blind zone alert system indicators located in the outside rearview mirrors briefly turn ON and then OFF during the system self test when ignition is turned ON.
- If the side blind zone alert system indicators do not briefly turn ON and OFF
Refer to Circuit/System Testing
- Go to next step: If both side blind zone alert indicators briefly turn ON and OFF
- If the side blind zone alert system indicators do not briefly turn ON and OFF
- All OK.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.