S79P Window Switch - Passenger (A45)

2018 Chevrolet Tahoe FL, 4WD, GasSECTION S79P Window Switch - Passenger (A45)
GM1664585
Connector Part Information
  • Harness Type: Passenger Door Trim
  • OEM Connector: 13548562
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 18-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.75 YE/WH 3413 Passenger Mirror Motor Fold Out Control I -
2 0.75 YE/VT 3397 Passenger Mirror Motor Up (+) Down (-) Control I -
3 0.75 WH 3398 Passenger Mirror Motor Common Control I -
4 0.35 YE/RD 3399 Passenger Mirror Position Sensor 5V Reference I -
5 0.35 BU/YE 3401 Passenger Mirror Position Sensor Up (+) Down (-) Signal I -
6 0.35 BK/GN 3400 Passenger Mirror Position Sensor Low Reference I -
7 0.75 BU/GY 3414 Passenger Mirror Motor Fold In Control I -
8 0.75 GN/BK 3396 Passenger Mirror Motor Right (+) Left (-) Control I -
9 0.5 GN/WH 7530 Local Interconnect Network Serial Data Bus 8 I -
10 - - - Not Occupied - -
11 0.35 VT/WH 3403 Passenger Mirror Position Sensor Left (-) Right (+) Signal I -
12 - - - Not Occupied - -
13 0.35 BK 1250 Ground I -
14 0.35 VT/GY 2765 Power Window Switch Right Front Express Signal I -
15 0.35 BN/YE 167 Power Window Master Switch Right Front Down Signal I -
16 0.5 RD/BU 840 Battery Positive Voltage I -
17 0.35 YE 6817 LED Backlight Dimming Control I -
18 0.35 YE/BK 166 Power Window Master Switch Right Front Up Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.