SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018SONIC PREMIER, 4D SEDAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 96 (OBJECT DETECTION SYSTEM AND PEDESTRIAN PROTECTION SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDTC B1008: CALIBRATION DATA NOT PROGRAMMEDCIRCUIT/SYSTEM VERIFICATION
2018 Chevrolet Sonic Premier, 4D Sedan, Standard Trans

Circuit/System Verification

2018 Chevrolet Sonic Premier, 4D Sedan, Standard TransSECTION Circuit/System Verification
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Do not diagnose this DTC if set in history

  1. Ignition ON.
  2. Verify that DTC B101E 42 is not set.
    • If the DTC is not set 
  3. Verify that DTC B1008 is not set.
    • If DTC is set 
    1. Calibrate the front camera module. Refer to Front View Camera Module Learn .
    2. Verify the DTC does not set.
      • If the DTC sets, replace the frontview camera module.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  4. All OK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.