SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018SONIC PREMIER, 4D SEDAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 249 (DISC BRAKE SYSTEM)SPECIFICATIONSDISC BRAKE COMPONENT SPECIFICATIONS
2018 Chevrolet Sonic Premier, 4D Sedan, Standard Trans

Disc Brake Component Specifications

2018 Chevrolet Sonic Premier, 4D Sedan, Standard TransSECTION Disc Brake Component Specifications
WARNING: This page is about a different car, the 2018 GMC Canyon and 2018 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Brakes
  • Brake Rotor Diameter
 310.0 mm 12.20 in
  • Brake Rotor Discard Thickness*
 25.0 mm 0.98 in
  • Brake Rotor Maximum Allowable Assembled Lateral Runout
 0.05 mm 0.002 in
  • Brake Rotor Maximum Allowable Scoring
 1.50 mm 0.059 in
  • Brake Rotor Maximum Allowable Thickness Variation
 0.006 mm 0.00024 in
  • Brake Rotor Thickness New
 27.0 mm 1.07 in
Rear Brakes
  • Brake Rotor Diameter
 324.0 mm 12.76 in
  • Brake Rotor Discard Thickness*
 16.5 mm 0.650 in
  • Brake Rotor Maximum Allowable Assembled Lateral Runout
 0.05 mm 0.002 in
  • Brake Rotor Maximum Allowable Scoring
 1.50 mm 0.059 in
  • Brake Rotor Maximum Allowable Thickness Variation
 0.006 mm 0.00024 in
  • Brake Rotor Thickness- New
 18.0 mm 0.709 in
*All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the discard thickness specification.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.