Rear Side Door Locking Rod Replacement (Sedan)

2018 Chevrolet Sonic Premier, 4D Sedan, Standard TransSECTION Rear Side Door Locking Rod Replacement (Sedan)
GM2019703Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear side door lock. Refer to Rear Side Door Latch Replacement . Do Not remove the lock completely from the door, lower the lock to disconnect the rod.
1 Rear Side Door Lock Rod

Procedure

  1. Place the window in the full up position.
  2. Remove the water deflector.
  3. Transfer components as necessary.
  4. In order to prevent outside handle lever pre-load, lock, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral lock clip to outside handle rod. Integral lock clip shall be in the full up position while securing to outside handle rod. Refer to Rear Side Door Outside Handle Rod Adjustment .

TIP:  Inspect the door lock system for proper operation before installing the door trim panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.