SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018SONIC LS, 1.8L ENG VIN H, AUTOMATIC TRANSREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSFIXED AND MOVEABLE WINDOW SYSTEMREPAIR INSTRUCTIONSREAR WINDOW REVEAL MOLDING REPLACEMENT
2018 Chevrolet Sonic LS, 1.8L Eng VIN H, Automatic Trans

Rear Window Reveal Molding Replacement

2018 Chevrolet Sonic LS, 1.8L Eng VIN H, Automatic TransSECTION Rear Window Reveal Molding Replacement
GM2425011Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Remove the rear window to replace the reveal molding. Refer to Rear Window Replacement .
1 Rear Window Reveal Molding
WARNING:

Refer to Glass and Sheet Metal Handling Warning .

Procedure

  1. Mark the window at both ends before remove the reveal molding for installing.
  2. Place the window on a clean and dry surface.
  3. Use a suitable plastic tool, use care when releasing the reveal molding not to pry on the window.
  4. Clean around the edges and surface of the window and molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint free cloth.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.