Rear Side Door Window Outer Sealing Strip Replacement (Hatchback)

2018 Chevrolet Sonic LS, 1.8L Eng VIN H, Automatic TransSECTION Rear Side Door Window Outer Sealing Strip Replacement (Hatchback)
GM2425049Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Rear Side Door Window Outer Sealing Strip Screw
CAUTION:

Refer to Fastener Caution .


TightenΒ 
2 N.m (18 lb in)
NOTE:

Open the rear door to the full open position to expose the rear side door window outer sealing strip screw that is located on the front inner edge of the door.

2 Rear Side Door Window Outer Sealing Strip

Procedure

  1. Use the appropriate tool, lift the front corner of the sealing strip and pull upward and away from the door flange.
  2. Press firmly to insert the rear side door window sealing strip back on the door flange.
  3. Inspect the door window for proper operation before installing the door trim panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.