Engine Control Module Replacement

2018 Chevrolet Silverado 2500 HD WT, 2D Pickup, 6.0L Eng VIN G, RWD, GasSECTION Engine Control Module Replacement
WARNING: This page is about a different car, the 2018 GMC Sierra 1500 and 2018 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Control Module Component Locations
GM3267086Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary ProcedureΒ 
Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L83, L86, L8B, LV3)Battery Negative Cable Disconnection and Connection (Dual Battery) .
1 Electronic Control Module
WARNING:

Refer to Safety Glasses Warning .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.