SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018SILVERADO 2500 HD WT, 2D PICKUP, 6.0L ENG VIN G, RWD, GASREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTMEMORY MODULESPROGRAMMING AND SETUP - ALL SYSTEMSREPAIR INSTRUCTIONSK114B HYBRID/EV POWERTRAIN CONTROL MODULE 2: PROGRAMMING AND SETUPUNSUCCESSFUL PROGRAMMING RECOVERY
2018 Chevrolet Silverado 2500 HD WT, 2D Pickup, 6.0L Eng VIN G, RWD, Gas

Unsuccessful Programming Recovery

2018 Chevrolet Silverado 2500 HD WT, 2D Pickup, 6.0L Eng VIN G, RWD, GasSECTION Unsuccessful Programming Recovery

If programming a control module is not successful, perform the following procedure:

  1. Ignition ON. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
  2. Attempt to reprogram the ECU.
    • If the programming is not successful 
    1. Ignition OFF for 1 minute, ignition ON.
    2. Attempt to reprogram the ECU.
      • If the programming is not successful - Replace the component: K114B Hybrid/EV Powertrain Control Module 2
      • If the programming is successful
    3. All OK.
    • Go to next step: If the programming is successful 
  3. All OK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.