Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2018CORVETTE GRAND SPORT, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALCOMPONENT LOCATIONS - ELECTRICAL CENTER IDENTIFICATION VIEWSELECTRICAL CENTER IDENTIFICATION VIEWSX53A FUSE BLOCK - REAR BODY X2
2018 Chevrolet Corvette Grand Sport, 2D Convertible, Standard Trans
X53A Fuse Block - Rear Body X2
2018 Chevrolet Corvette Grand Sport, 2D Convertible, Standard TransSECTION X53A Fuse Block - Rear Body X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575730 | J-35616-42 (RD) | J-38125-11A | Not Available | Not Available | Not Available | Not Available |
| II | 13575774 | J-35616-14 (GN) | J-38125-557 | Not Available | Not Available | Not Available | Not Available |
| III | 13575781 | J-35616-35 (VT) | J-38125-36 | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | RD/YE | 4340 | Battery Positive Voltage | II | - |
| 2 | - | - | - | Not Occupied | - | - |
| 3 | 2.5 | RD/VT | 1242 | Battery Positive Voltage | III | - |
| 4 | - | - | - | Not Occupied | - | - |
| 5 | 2.5 | RD/L-BU | 1842 | Battery Positive Voltage | I | - |
| 6 - 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.5 | BN/YE | 2267 | Mirror Heating Element Control | II | - |
| 11 - 13 | - | - | - | Not Occupied | - | - |
| 14 | 0.5 | BN/YE | 2267 | Mirror Heating Element Control | II | - |
| 15 - 17 | - | - | - | Not Occupied | - | - |
| 18 | 2.5 | RD/WH | 1642 | Battery Positive Voltage | I | - |
| 19 - 21 | - | - | - | Not Occupied | - | - |
| 22 | 0.5 | RD/WH | 2040 | Battery Positive Voltage | II | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.