Parking Assist Control Module Replacement

2016 Chevrolet Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas/EthanolSECTION Parking Assist Control Module Replacement
Fig 1: Rear Object Alarm Control Module
GM3273103Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the rear seat. Refer to Rear Seat Removal and Installation (Extended Cab with AM7)Rear Seat Removal and Installation (Heavy Duty Crew Cab with A68)Rear Seat Removal and Installation (Light Duty Crew Cab with A68)Rear Seat Removal and Installation (Extended Cab with A68) .
  2. Remove the body rear panel insulator. Refer to Body Rear Panel Insulator Replacement .
1 Rear Object Control Module Fasteners (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
6 N.m (53 lb in)
2 Rear Object Control Module

Procedure

  1. Disconnect the electrical connections.
  2. For programming and set up, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.