Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNSPECIFICATIONSFASTENER SPECIFICATIONS
2016 Chevrolet Impala LS, 3.6L Eng VIN N
Fastener Specifications
2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Intermediate Steering Shaft Lower Bolt | 34 N.m | 25 lb ft |
| Intermediate Steering Shaft Upper Bolt | 36 N.m | 27 lb ft |
| Steering Column Bracket Bolt | 3 N.m | 27 lb in |
| Steering Column Nut | 22 N.m | 16 lb ft |
| Steering Column Telescope Actuator Bolt | 5 N.m | 44 lb in |
| Steering Column Telescope Actuator Pivot Bolt | 18 N.m | 13 lb ft |
| Steering Column Tilt Wheel Actuator Bolt | 5 N.m | 44 lb in |
| Steering Column Tilt Wheel and Telescope Control Module Bolt | 3 N.m | 27 lb in |
| Steering Wheel Bolt | 45 N.m | 33 lb ft |
| Steering Wheel Vibration Dampener Fastener | 3.5 N.m | 31 lb in |
| Turn Signal Switch Bracket Bolt | 15 N.m | 11 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.