Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - S33R X2 TO X92 MCYCOMPONENT CONNECTOR END VIEWSS48E MULTIFUNCTION SWITCH - CENTER CONSOLE
2016 Chevrolet Impala LS, 3.6L Eng VIN N
S48E Multifunction Switch - Center Console
2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION S48E Multifunction Switch - Center Console
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | BU/VT | 1788 | Traction Control Switch Signal 1 | I | - |
| 2 | 0.35 | BK | 2250 | Ground | I | - |
| 3 | 0.35 | GN/BU | 6133 | Local Interconnect Network Serial Data Bus 2 | I | - |
| 4 | 0.35 0.5 |
VT/GY YE |
539 6817 |
Run/Crank Ignition 1 Voltage LED Backlight Dimming Control |
I I |
FX3+KA1 FX3-KA1 |
| 5 | 0.35 | BN/GY | 1462 | Heated Seat Switch Signal | I | - |
| 6 | 0.35 | YE/BU | 1505 | Passenger Heated Seat Switch Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.