Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K9 X4 TO K29R X2COMPONENT CONNECTOR END VIEWSK9 BODY CONTROL MODULE X5
2016 Chevrolet Impala LS, 3.6L Eng VIN N
K9 Body Control Module X5
2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION K9 Body Control Module X5
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575870 | J-35616-64B (LT BU) | J-38125-12A | SNAC3-A021T-M0.64 | Delphi 20 | J | J |
| II | 13575871 | J-35616-35 (VT) | J-38125-12A | Not Available | Not Available | Not Available | Not Available |
| III | 13575871 | J-35616-35 (VT) | J-38125-12A | SNAC-A061T-M2.8 | Delphi 20 | E | A |
| IV | 13579954 | J-35616-64B (LT BU) | J-38125-12A | Not Available | Not Available | Not Available | Not Available |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | YE/D-BU | 18 | Left Rear Stop/Turn Lamp Control | III | - |
| 2 | 0.35 0.5 |
D-BU/WH D-BU/WH |
1314 1314 |
Left Front Turn Signal Lamp Control | II III |
- - |
| 3 | 0.75 | RD/L-GN | 3840 | Battery Positive Voltage | III | - |
| 4 | 0.5 | RD/WH | 3440 | Battery Positive Voltage | III | - |
| 5 | 0.35 | VT/YE | 3267 | Child Security Lock Relay Control | I | - |
| 6 | 0.35 | BK/VT | 5077 | Current Sensor Low Reference | I | - |
| 7 | 0.5 | GY/BN | 309 | Right Park Lamp Control | I | - |
| 8 - 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.35 | GY/YE | 6188 | Lift Glass/Rear Compartment Lid Motor Release Control | I | - |
| 12 | 0.35 | WH/D-BU | 6311 | Cruise/ETC/TCC Brake Signal | I | - |
| 13 | 0.35 | BN/YE | 1970 | Headlamp Low Beam Relay Control | I | - |
| 14 | 0.13 | BN | 5486 | Run Relay Coil Control | IV | - |
| 15 - 17 | - | - | - | Not Occupied | - | - |
| 18 | 0.35 | BN/VT | 1969 | Headlamp High Beam Relay Control | I | - |
| 19 | 0.35 | BN/WH | 28 | Horn Relay Control | I | - |
| 20 - 23 | - | - | - | Not Occupied | - | - |
| 24 | 0.35 | WH/VT | 860 | Front Windshield Wiper Switch High Signal | I | - |
| 25 - 26 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.