Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K31 X1 TO M7COMPONENT CONNECTOR END VIEWSK84 KEYLESS ENTRY CONTROL MODULE X4 (ATH/BTM)
2016 Chevrolet Impala LS, 3.6L Eng VIN N
K84 Keyless Entry Control Module X4 (ATH/BTM)
2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION K84 Keyless Entry Control Module X4 (ATH/BTM)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575867 | J-35616-64B (LT BU) | J-38125-215A | SAIT-A03T-M064 | Yazaki 14 | P | P |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | YE/GY | 6158 | Right Rear Door Handle Switch Signal | I | - |
| 2 | 0.35 | BN/YE | 6157 | Left Rear Door Handle Switch Signal | I | - |
| 3 - 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | VT | 3560 | Passive Entry Driver Door Antenna Signal Hi | I | - |
| 7 | 0.35 | VT/GY | 3561 | Passive Entry Driver Door Antenna Signal Lo | I | - |
| 8 | - | - | - | Not Occupied | - | - |
| 9 | 0.35 | L-GN/BK | 3563 | Passive Entry Passenger Door Antenna Signal Lo | I | - |
| 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.35 | VT/WH | 3571 | Passenger Door Handle Switch Signal | I | - |
| 12 | 0.35 | L-GN/WH | 3570 | Driver Door Handle Switch Signal | I | - |
| 13 - 15 | - | - | - | Not Occupied | - | - |
| 16 | 0.5 | BN/L-GN | 3568 | Passive Entry Rear Closure Antenna Signal Hi | I | - |
| 17 | - | - | - | Not Occupied | - | - |
| 18 | 0.5 | L-GN/GY | 3569 | Passive Entry Rear Closure Antenna Signal Lo | I | - |
| 19 | - | - | - | Not Occupied | - | - |
| 20 | 0.35 | L-GN/YE | 3562 | Passive Entry Passenger Door Antenna Signal Hi | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.