Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K31 X1 TO M7COMPONENT CONNECTOR END VIEWSK31 NAVIGATION CONTROL MODULE X2
2016 Chevrolet Impala LS, 3.6L Eng VIN N
K31 Navigation Control Module X2
2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION K31 Navigation Control Module X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | GY | 5839 | Left Auxiliary Audio Signal (2) | I | - |
| 2 | 0.35 | BARE | 5842 | Auxiliary Audio Screen (2) | I | - |
| 3 | 0.35 | YE | 658 | Cellular Telephone Voice Signal | I | - |
| 4 | 0.35 | YE/WH | 7001 | Remote Radio Audio Ground | I | - |
| 5 | 0.35 | GY/WH | 5839 | Left Auxiliary Audio Signal (2) | I | - |
| 6 | 0.35 | BARE | 5842 | Auxiliary Audio Screen (2) | I | - |
| 7 | 0.35 | GN | 5841 | Right Auxiliary Audio Signal (2) | I | - |
| 8 | 0.35 | VT | 5843 | Auxiliary Audio Common Signal | I | - |
| 9 | 0.35 | BK/YE | 659 | Cellular Telephone Voice Low Reference | I | - |
| 10 | 0.35 | BARE | 1782 | Low Reference | I | - |
| 11 | 0.35 | GN/WH | 5841 | Right Auxiliary Audio Signal (2) | I | - |
| 12 | 0.35 | VT/WH | 5843 | Auxiliary Audio Common Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.