K31 Navigation Control Module X1

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION K31 Navigation Control Module X1
GM1653409
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15136073
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 16-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-64B (LT BU) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.75
0.35
RD/BU
GY
4540
5839
Battery Positive Voltage
Left Auxiliary Audio Signal 2
I
I
-
LVM
2 0.35
0.35
BARE
GN/YE
5842
7066
Auxiliary Audio Screen 2
Entertainment Remote Enable Signal
I
I
-
-
3 0.35
0.35
GN
YE
5060
658
Low Speed GMLAN Serial Data
Cellular Telephone Voice Signal
I
I
-
-
4 0.35 YE/WH 7001 Remote Radio Audio Ground I -
5 0.35
0.35
GY/WH
GN/BU
5839
7532
Left Auxiliary Audio Signal 2
Local Interconnect Network Serial Data Bus 10
I
I
-
-
6 0.35
0.35
BARE
GN/WH
5842
6764
Auxiliary Audio Screen 2
Display Control
I
I
-
-
7 0.35
0.35
GN
GN/RD
5841
7527
Right Auxiliary Audio Signal 2
Local Interconnect Network Serial Data Bus 5
I
I
-
-
8 0.35
0.5
VT
BK
5843
450
Auxiliary Audio Common Signal
Ground
I
I
-
-
9 0.35 BK/YE 659 Cellular Telephone Voice Low Reference I -
10 0.35 BARE 1782 Low Reference I -
11 0.35 GN/WH 5841 Right Auxiliary Audio Signal 2 I -
12 0.35 VT/WH 5843 Auxiliary Audio Common Signal I -
13 - 16 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.