K125 Dual Battery Control Module (KL9)

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION K125 Dual Battery Control Module (KL9)
GM2487928
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 805-122-541
  • Service Connector: 13581092
  • Description: 4-Way F 1.2 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-16 (LT GN) Not Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 YE/D-BU 4161 Transmission Auxiliary Pump Relay Control I -
2 0.5 VT/GY 6386 Starter Enable Relay (PPEI 3) Control I -
3 0.5 VT/BK 1239 Run/Crank Ignition 1 Voltage I -
4 1 BK 150 Ground I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.