Front Floor Console Insert Replacement

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION Front Floor Console Insert Replacement
Fig 1: Front Floor Console Insert
GM2895039Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Loosen the forward 10 retainers from the left front floor console extension panel. Refer to Front Floor Console Extension Replacement - Left Side .
  2. Loosen the forward 10 retainers from the right front floor console extension panel. Refer to Front Floor Console Extension Replacement - Right Side .
1 Front Floor Console Insert
Procedure 
Use a flat bladed plastic trim tool in order to release the retainers securing the console insert to the front floor console assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.