Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel
Fig 1: Ignition Lock Key Transmitter Antenna - Instrument Panel
GM3516683Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the front floor console extension - left side. Refer to Front Floor Console Extension Replacement - Left Side .
  2. Reposition the front floor panel carpet as - left side. Refer to Front Floor Panel Carpet Replacement - Left Side .
1 Ignition Lock Key Transmitter Antenna- Instrument Panel

Procedure

  1. Unsnap to release the ignition lock key transmitter antenna.
  2. Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.