SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASOBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEMREPAIR INSTRUCTIONSFORWARD RANGE RADAR MODULE REPLACEMENT
2016 Chevrolet Impala LS, 3.6L Eng VIN N

Forward Range Radar Module Replacement

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION Forward Range Radar Module Replacement
Fig 1: Forward Range Radar Module
GM2964053Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1 Forward Range Radar Module Fastener (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten 
9 N.m (80 lb in)
2 Forward Range Radar Module Bracket
3 Forward Range Radar Module

Procedure

  1. Disconnect the electrical connector.
  2. Remove the module beginning with the lower ball socket.
  3. Carefully lift the module away from bracket using the appropriate tool.
  4. For programming and set up, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.