SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016IMPALA LS, 3.6L ENG VIN NREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTHEADLIGHTSLIGHTING SYSTEM - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSSTOP BULB REPLACEMENT
2016 Chevrolet Impala LS, 3.6L Eng VIN N

Stop Bulb Replacement

2016 Chevrolet Impala LS, 3.6L Eng VIN NSECTION Stop Bulb Replacement
Fig 1: Stop Bulb
GM3612675Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Reposition the rear compartment side trim-left hand when servicing left side. Refer to Rear Compartment Side Trim Replacement - Left Side (Without CNG) and Rear Compartment Side Trim Replacement - Left Side (With CNG) .
  2. Reposition the rear compartment side trim-right hand when servicing right side. Refer to Rear Compartment Side Trim Replacement - Right Side (Without CNG) and Rear Compartment Side Trim Replacement - Right Side (With CNG) .
1 Stop Bulb

Procedure

  1. Rotate stop bulb socket counterclockwise and pull from the rear body structure stop lamp.
  2. Pull stop bulb straight out from the stop bulb socket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.