Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016EXPRESS 2500 BASE, VAN CARGO, 6.6L ENG VIN LREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSWIRING SYSTEMS & POWER MANAGEMENT - SPLICE PACK CONNECTOR END VIEWSSPLICE PACK CONNECTOR END VIEWSJX348 SPLICE PACK
2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN L
JX348 Splice Pack
2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN LSECTION JX348 Splice Pack
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575721 | J-35616-4A (PU) | J-38125-553 | 12110844 | Delphi 4 | C | A |
| II | 13575721 | J-35616-4A (PU) | J-38125-553 | 12110844 | Delphi 4 | E | 4 |
| III | 13579958 | J-35616-4A (PU) | J-38125-11A | 15324340 | Delphi 19 | F | G |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| A | 0.35 | BK | 1850 | Ground | II | - |
| B | 0.8 | BK | 1850 | Ground | I | - |
| C | 3 | BK | 1850 | Ground | III | - |
| D | 0.35 | BK | 1850 | Ground | II | - |
| E - H | - | - | - | Not Occupied | - | - |
| J | 1 | BK | 1850 | Ground | I | - |
| K - M | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.