SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016EXPRESS 2500 BASE, VAN CARGO, 6.6L ENG VIN LREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL UPPER TRIM PAD REPLACEMENT
2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN L

Instrument Panel Upper Trim Pad Replacement

2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN LSECTION Instrument Panel Upper Trim Pad Replacement
Fig 1: Instrument Panel Upper Trim Pad
GM1891938Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the drivers knee bolsters bracket. Refer to Driver Knee Bolster Bracket Replacement .

    Remove the cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

  2. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement .
1 Instrument Panel Upper Trim Pad Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
2 Instrument Panel Upper Trim Pad Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the upper trim pad, transfer all necessary components.
3 Retainer Clip (Qty: 4)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.