Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2016EXPRESS 2500 BASE, VAN CARGO, 6.6L ENG VIN LREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMBOLTED EXTERIOR BODY PANELS AND CLOSURESSPECIFICATIONSFASTENER SPECIFICATIONS
2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN L
Fastener Specifications
2016 Chevrolet Express 2500 Base, Van Cargo, 6.6L Eng VIN LSECTION Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Tray To The Wheelhouse Bolts | 25 N.m | 18 lb ft |
| Door Locator Mounting Bolts | 10 N.m | 89 lb in |
| Fender To Radiator Support Bolts | 25 N.m | 18 lb ft |
| Front Fender Bolts | 25 N.m | 18 lb ft |
| Front Fender Extension To Body Bolts | 11 N.m | 97 lb in |
| Front Fender Extension To Rocker Bolts | 2 N.m | 18 lb in |
| Door Check Link Bolts | 11 N.m | 97 lb in |
| Front Door Hinge Bolts | 25 N.m | 18 lb ft |
| Front Wheelhouse To Radiator Support Bolts | 25 N.m | 18 lb ft |
| Fuel Filler Door Retaining Screws | 5 N.m | 44 lb in |
| Hood Hinge Pivot Bolts And Nuts | 25 N.m | 18 lb in |
| Hood Hold-Open Rod Bolt | 11 N.m | 97 lb in |
| Hood Latch Bolts | 15 N.m | 11 lb ft |
| Rear Door Hinge Bolts | 25 N.m | 18 lb ft |
| Rear Door Lower/Upper Striker Bolts | 25 N.m | 18 lb ft |
| Rear Door Wedge Bolts | 10 N.m | 89 lb in |
| Rear Side Access Door Hinge Screws | 10 N.m | 89 lb in |
| Sheet Metal Support To The Radiator Support Bolts | 25 N.m | 18 lb ft |
| Side Front Door Check Strap Bolts | 10 N.m | 89 lb in |
| Side Rear Door Check Strap Replacement Bolts | 10 N.m | 89 lb in |
| Sliding Door Check Link Nuts | 10 N.m | 89 lb ft |
| Sliding Door Lower Roller Track Bolts | 11 N.m | 97 lb in |
| Sliding Door Upper Roller Bolts | 25 N.m | 18 lb ft |
| Sliding Door Stop Nut | 25 N.m | 18 lb ft |
| Support Brace To Radiator Bolts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.