Fastener Specifications

2015 Chevrolet Tahoe LS, RWDSECTION Fastener Specifications
Application Specification
Metric English
Power Steering Assist Motor Bolt (Requires a NEW bolt.)Β  10 N.m 89 lb in
Power Steering Wiring Harness Extension Harness Ground Bolt 6 N.m 53 lb in
Steering Gear Bolt - Left Side 220 N.m 162 lb ft
Steering Gear Bolt - Right Side 100 N.m 74 lb ft
Steering Linkage Inner Tie Rod 120 N.m 89 lb ft
Steering Linkage Outer Tie Rod Nut
  • First Pass:<!--Used for torque specification-->
35 N.m 26 lb ft
  • Final Pass:<!--Used for torque specification-->
85-100 Degrees
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.