Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Specifications
2015 Chevrolet Tahoe LS, RWDSECTION Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Backup Alarm Fastener | 12 N.m | 106 lb in |
| Communication Interface Module Bracket Bolt | 2.5 N.m | 22 lb in |
| Communication Interface Module Bracket Nut | 4 N.m | 35 lb in |
| Disc Player Fasteners | 2.5 N.m | 22 lb in |
| High Frequency Antenna Fastener | 9 N.m | 80 lb in |
| Human machine Interface Control Module Bracket Fastener | 2.5 N.m | 22 lb in |
| Radio Control Fasteners | 2.5 N.m | 22 lb in |
| Radio Front Floor Console Speaker Fastener | 6 N.m | 53 lb in |
| Radio Front Center Speaker Fastener | 2.5 N.m | 22 lb in |
| Radio Front Side Door Speaker Fastener | 2.5 N.m | 22 lb in |
| Radio Rear Corner Upper Garnish Molding Speaker Fastener | 2.5 N.m | 22 lb in |
| Radio Rear Side Door Speaker Fastener | 2.5 N.m | 22 lb in |
| Radio Speaker Fastener | 2.5 N.m | 22 lb in |
| Radio Speaker Amplifier Fastener | 9 N.m | 80 lb in |
| Video Auxiliary Display Fastener | 2 N.m | 18 lb in |
| Video Display Fastener | 2 N.m | 18 lb in |
| Video Player Fastener | 2.5 N.m | 22 lb in |
| Video Processing Module Fastener | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.