Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015SILVERADO 1500 HIGH COUNTRY, 5.3L ENG VIN C, RWD, GASREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - F113P TO K20 X2 LMLCOMPONENT CONNECTOR END VIEWSK9 BODY CONTROL MODULE X2
2015 Chevrolet Silverado 1500 High Country, 5.3L Eng VIN C, RWD, Gas
K9 Body Control Module X2
2015 Chevrolet Silverado 1500 High Country, 5.3L Eng VIN C, RWD, GasSECTION K9 Body Control Module X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575871 | J-35616-35 (VT) | J-38125-12A | Not Required | Not Required | Not Required | Not Required |
| I | 13575871 | J-35616-35 (VT) | J-38125-12A | Not Required | Not Required | Not Required | Not Required |
| II | 13582297 | J-35616-64B (LT BU) | J-38125-22 | Not Required | Not Required | Not Required | Not Required |
| II | 13582297 | J-35616-64B (LT BU) | J-38125-22 | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | RD/WH | 2740 | Battery Positive Voltage | I | - |
| 2 | 0.75 | BK | 1850 | Ground | I | - |
| 3 | 0.5 | RD/BN | 2940 | Battery Positive Voltage | I | - |
| 4 | 0.75 | RD/VT | 4040 | Battery Positive Voltage | I | - |
| 5 | - | - | - | Not Occupied | - | - |
| 6 | 0.35 | GY | 5697 | Child Lockout Indicator Control | II | - |
| 7 | 0.35 0.35 |
WH/L-GN WH |
526 526 |
Stop Lamp Switch Signal | II | - - |
| 8 | 0.5 | YE | 6817 | LED Backlight Dimming Control | II | - |
| 9 | 0.35 | YE/GY | 44 | Instrument Panel Lamp Dimmer Switch Signal | II | - |
| 10 | 0.35 0.35 |
WH WH/D-BU |
278 278 |
Ambient Light Sensor Signal | II | - - |
| 11 - 12 | - | - | - | Not Occupied | - | - |
| 13 | 0.35 | GY/RD | 598 | 5 Volt Reference | II | - |
| 14 | 0.35 0.35 |
- D-BU/VT |
1788 1788 |
Traction Control Switch Signal (1) | II | - - |
| 15 | 0.35 | BN/WH | 781 | Driver Door Lock Switch Unlock Signal | II | - |
| 16 | 0.35 | GY | 3273 | Remote Function Actuator Low Reference | II | - |
| 17 | - | - | - | Not Occupied | - | - |
| 18 | 0.5 | GY | 158 | Cargo Lamp Switch Signal | II | - |
| 19 | 0.35 | BN/YE | 780 | Driver Door Lock Switch Lock Signal | II | - |
| 20 | 0.5 0.5 |
WH WH/D-BU |
3691 3691 |
Trailer Brake Apply Signal | II | - - |
| 21 | 0.5 0.5 |
- L-GN/GY |
6135 6135 |
Local Interconnect Network Serial Data Bus 4 | II | - - |
| 22 - 24 | - | - | - | Not Occupied | - | - |
| 25 | 0.35 | GY/WH | 3272 | Remote Function Actuator Control | II | - |
| 26 | 0.35 0.35 |
L-GN/WH - |
111 111 |
Hazard Switch Signal | II | - - |
| 27 | 0.35 0.35 |
YE/L-GN YE |
3274 3274 |
Remote Function Actuator Transmit Signal | II | - - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.