Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO, 6.0L ENG VIN BREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASOBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURES (OBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEM)DTC B0010: REVERSE GEAR SIGNALCIRCUIT/SYSTEM TESTING (OBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEM)
2015 Chevrolet Express 2500 Base, Van Cargo, 6.0L Eng VIN B
Circuit/System Testing (Object Detection And Pedestrian Protection System)
2015 Chevrolet Express 2500 Base, Van Cargo, 6.0L Eng VIN BSECTION Circuit/System Testing (Object Detection And Pedestrian Protection System)
- Ignition OFF, disconnect the harness connector at the rearview camera.
- Engine running, park brake applied, transmission in REVERSE, test for B+ between the B+ circuit terminal 3 and ground.
- If less than the specified value, test the control circuit for a short to ground or an open/high resistance.
- If all circuits test normal, replace the BCM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.