Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN BREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSUPPER INTERMEDIATE STEERING SHAFT REPLACEMENTINSTALLATION PROCEDURE
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN B
Installation Procedure
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN BSECTION Installation Procedure
- Install the upper intermediate shaft and connect the upper intermediate shaft to the steering column.
- Install the upper intermediate shaft (2) to steering column retaining nut and bolt (1) and tighten to 62 N.m (46 lb ft).
- Install the intermediate shaft bearing. Refer to Intermediate Steering Shaft Bearing Replacement .
- Remove the J 42640 steering column anti-rotation pin from the steering column lower access hole.
CAUTION:
Refer to Fastener Caution .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.