SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN BREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSTRANSMISSION CONTROL REPLACEMENT
2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN B

Transmission Control Replacement

2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN BSECTION Transmission Control Replacement
Fig 1: View of Linear Shift Assembly
GM1950499Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the shift lever. Refer to Shift Lever Replacement .
1 Automatic Transmission Shift Lock Control Actuator

Procedure

  1. Use the appropriate tool to remove the automatic transmission shift lock control actuator.
  2. After repairs, the automatic transmission shift lock control actuator may need to be adjusted. Refer to Automatic Transmission Shift Lock Control Actuator Replacement .
2 Transmission Control Bolt (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
3 Transmission Control
Procedure 
Turn the ignition lock cylinder to the OFF-LOCK position and remove the park lock cable from the ignition lock cylinder case.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.