Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2015EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN BREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL AND STEERING COLUMNREPAIR INSTRUCTIONSLOWER INTERMEDIATE STEERING SHAFT REPLACEMENTINSTALLATION PROCEDURE

2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN B

Installation Procedure

2015 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN BSECTION Installation Procedure

Fig 1: Lower Intermediate Shaft & Intermediate Shaft Bearing

GM828827

Courtesy of GENERAL MOTORS COMPANY

Install the lower intermediate shaft to the vehicle.
Connect the lower intermediate shaft to the intermediate shaft bearing.

CAUTION:

Refer to Fastener Caution .

Install the lower intermediate shaft to the intermediate shaft bearing retaining bolt and tighten to 45 N.m (33 lb ft).

Fig 2: Lower Intermediate Shaft To Power Steering Gear Retaining Bolt

GM3471416

Courtesy of GENERAL MOTORS COMPANY

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.