Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014TRAVERSE LT, 4D UTILITYREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 56 (VEHICLE DIAGNOSTIC INFORMATION - SCAN TOOL INFORMATION)SPECIFICATIONSSEAT MEMORY CONTROL MODULE SCAN TOOL INFORMATION
2014 Chevrolet Traverse LT, 4D Utility
Seat Memory Control Module Scan Tool Information
2014 Chevrolet Traverse LT, 4D UtilitySECTION Seat Memory Control Module Scan Tool Information
WARNING: This page is about a different car, the 2015 GMC Acadia, 2015 Chevrolet Traverse, and 2015 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Driver Seat Front Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat front vertical sensor. |
| Driver Seat Horizontal Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat horizontal sensor. |
| Driver Seat HVC Level | - | High | The scan tool displays High, Medium or Low. This is the current level of the driver heated seat or the heated cooled seat. |
| Driver Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the driver heated seat or the heated cooled seat. |
| Driver Seat Rear Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat rear vertical sensor. |
| Driver Seat Recline Sensor | - | Varies | This displays Volts. This is the voltage supplied to the driver seat recline sensor. |
| Front Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
| Front Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
| Front Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
| Front Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
| Horizontal Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
| Horizontal Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
| Horizontal Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
| Horizontal Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
| Lumbar Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar downward switch. |
| Lumbar Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar forward switch. |
| Lumbar Horizontal Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar horizontal sensor. |
| Lumbar Inflation Value | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar inflation. |
| Lumbar Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
| Lumbar Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor downward. |
| Lumbar Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor forward. |
| Lumbar Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor rearward. |
| Lumbar Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar motor upward. |
| Lumbar Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar rearward switch. |
| Lumbar Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the lumbar upward switch. |
| Lumbar Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
| Lumbar Vertical Sensor | - | Varies | This displays Volts. This is the voltage supplied to the lumbar vertical sensor. |
| Massage Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the massage switch. |
| Lumbar Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the lumbar vertical position. |
| Memory 1 Adj. Pedals Position | - | Varies | This displays Volts. This is the voltage stored in memory for the position of the adjustable pedals. |
| Memory 2 Adj. Pedals Position | - | Varies | This displays Volts. This is the voltage stored in memory for the position of the adjustable pedals. |
| Passenger Seat HVC Mode | - | Off | The scan tool displays Off, Back & Cushion, Back Only or Cool. This is the current mode of the passenger heated seat or the heated cooled seat. |
| Rear Vertical Downward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
| Rear Vertical Motor Downward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
| Rear Vertical Motor Upward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
| Rear Vertical Upward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
| Recline Forward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
| Recline Motor Forward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
| Recline Motor Rearward | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
| Recline Rearward Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
| Seat Front Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
| Seat Horizontal Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
| Seat Rear Vertical Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
| Seat Recline Position | - | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
Memory Seat Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Clear Column Softstops | This output control is used to clear the steering column softstops stored in memory. |
| Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
| Learn Column Softstops | This output control is used to program the steering column softstops. |
| Lumbar Forward/Rearward | This output control is used to command the driver seat lumbar forward and rearward. |
| Lumbar Up/Down | This output control is used to command the driver seat lumbar Up and Down. |
| Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
| Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
| Seat Forward/Backward | This output control is used to command the driver seat forward and backward. |
| Telescope In/Out | This output control is used to command the telescope in and out. |
| Tilt Up/Down | This output control is used to command the tilt Up and Down. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.