Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014TRAVERSE LT, 4D UTILITYREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISDATA COMMUNICATION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDTC U0100 - U02FF: CONTROL MODULEDIAGNOSTIC FAULT INFORMATION
2014 Chevrolet Traverse LT, 4D Utility
Diagnostic Fault Information
2014 Chevrolet Traverse LT, 4D UtilitySECTION Diagnostic Fault Information
| Circuit | Short to Ground | Open/High Resistance | Short to Voltage | Signal Performance |
|---|---|---|---|---|
| B+ | U0100-U02FF | U0100-U02FF | - | - |
| Ignition | U0100-U02FF | U0100-U02FF | - | - |
| Accessory Wakeup Serial Data | U1814 | U0100-U02FF | - | - |
| Serial Data Communication Enable | U2099 | U0100-U02FF | - | - |
| Chassis High Speed GMLAN Serial Data (+) | U0074 | U0074, U0100-U02FF | U0074 | - |
| Chassis High Speed GMLAN Serial Data (-) | U0074 | U0074, U0100-U02FF | U0074 | - |
| Mid Speed GMLAN Serial Data (+) | U0074 | U0074, U0100-U02FF | U0074 | - |
| Mid Speed GMLAN Serial Data (-) | U0074 | U0074, U0100-U02FF | U0074 | - |
| High Speed GMLAN Serial Data (+) | 2 | U0073, U0100-U02FF | 2 | - |
| High Speed GMLAN Serial Data (-) | 2 | U0073, U0100-U02FF | 2 | - |
| Low Speed GMLAN Serial Data | 1 | U0100-U02FF | 1 | - |
| Ground | - | U0100-U02FF | - | - |
| 1. Scan tool does not communicate with low speed GMLAN device 2. Scan tool does not communicate with high speed GMLAN device |
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.