SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014TRAVERSE LT, 4D UTILITYREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT HARDWARE, SEAT TRIM, AND UPHOLSTERYREPAIR INSTRUCTIONS3RD ROW SEAT BACK COVER AND PAD REPLACEMENT
2014 Chevrolet Traverse LT, 4D Utility

3rd Row Seat Back Cover and Pad Replacement

2014 Chevrolet Traverse LT, 4D UtilitySECTION 3rd Row Seat Back Cover and Pad Replacement
Fig 1: 3rd Row Seat Back Cover And Pad
GM1831432Courtesy of GENERAL MOTORS COMPANY
3rd Row Seat Back Cover and Pad Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the rear seat No. 2 back cushion panel. Refer to 3rd Row Seat Back Panel Replacement .
  2. Remove the rear seat No. 2 head restraint. Refer to 3rd Row Seat Head Restraint Replacement .
1 Rear Seat No. 2 Cushion Cover

Procedure

  1. Disconnect the j-channel from the seat back cushion frame.
  2. Remove the seat back cushion cover from pad.
  3. Remove the swing wire between the inner and outer pads.
  4. Remove the seat back cushion cover from the pad.
2 Rear Seat No. 2 Back Cushion Pad
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.