Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2014EQUINOX LS, FWD, GAS/ETHANOLREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERBATTERY, CHARGING SYSTEM AND STARTING SYSTEMREPAIR INSTRUCTIONSBATTERY TRAY SUPPORT REPLACEMENT

2014 Chevrolet Equinox LS, FWD, Gas/Ethanol

Battery Tray Support Replacement

2014 Chevrolet Equinox LS, FWD, Gas/EthanolSECTION Battery Tray Support Replacement

Fig 1: Battery Tray Support

GM2240994

Courtesy of GENERAL MOTORS COMPANY

Battery Tray Support Replacement

Callout

Component Name

Preliminary Procedure

Disconnect the negative battery cable.Refer to Battery Negative Cable Disconnection and Connection .
Remove the positive battery cable.Refer to Battery Positive Cable Replacement (LFX) , Battery Positive Cable Replacement (LEA)
Remove the battery.Refer to Battery Replacement
Remove the battery tray.Refer to Battery Tray Replacement

1

Bolt (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
22 N.m (16 lb ft).

2

Battery Tray Support Bracket

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.