SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014EQUINOX LS, FWD, GAS/ETHANOLREPAIR AND DIAGNOSISENGINE MECHANICALSTARTERBATTERY, CHARGING SYSTEM AND STARTING SYSTEMREPAIR INSTRUCTIONSBATTERY HEAT SHIELD REPLACEMENT
2014 Chevrolet Equinox LS, FWD, Gas/Ethanol

Battery Heat Shield Replacement

2014 Chevrolet Equinox LS, FWD, Gas/EthanolSECTION Battery Heat Shield Replacement
Fig 1: Battery Heat Shield
GM2240847Courtesy of GENERAL MOTORS COMPANY
Battery Heat Shield Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Cover Replacement (Equinox) , Front Bumper Fascia Opening Cover Replacement (Terrain)
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the engine control module (ECM). Refer to Engine Control Module Replacement .
  4. Remove the air conditioning compressor hose retaining nut from the side of the battery heat shield and reposition the retaining clamp.
1 Nut
WARNING:

Refer to Exhaust Service Warning .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.