Roof Console Replacement

2014 Chevrolet Equinox LS, FWD, Gas/EthanolSECTION Roof Console Replacement
Fig 1: Roof Console
GM2244124Courtesy of GENERAL MOTORS COMPANY
Roof Console Replacement

Callout Component Name
1 Roof Console Assembly

Procedure

  1. Use a flat bladed plastic trim tool in order to release the retainer clips securing the roof console to the headliner assembly.
  2. Disconnect the roof console tether.
  3. Disconnect the electrical connections.
  4. When replacing the roof console assembly, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.