A20 Radio/HVAC Control

2014 Chevrolet Equinox LS, FWD, Gas/EthanolSECTION A20 Radio/HVAC Control
GM1664585
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 7283-4544-30
  • Service Connector: 89047360
  • Description: 18-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Core Crimp Insulation Crimp
I 13575845 J-35616-64B (L-BU) J-38125-215A SAIT-A03T-M064 14 P P
A20 Radio/HVAC Control

Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 TN 7458 CGI + I UYS or UYX
2 0.35 YE 7459 CGI - I UYS or UYX
3 0.35 GY 7460 Integrated Center Stack Serial Data Shield I UYS or UYX
4 0.35 L-GN 3291 Center Stack Wake-Up Signal I UYS or UYX
5 0.35 PK 893 DIC Select Menu Switch Signal I -
6 0.35 BN 897 DIC Switch Low Reference I -
7 0.35 L-BU 7532 Local Interconnect Network 10 I without UYS or UYX
8 0.35 YE 7531 Local Interconnect Network 9 I -
9 - - - Not Occupied - -
10 0.5 RD/WH 3240 Battery Positive Voltage I -
11 0.35 L-BU 3265 Child Security Switch Signal I -
12 0.35 L-BU 244 Passenger Door Lock Switch Lock Control I -
13 0.35 D-BU 245 Passenger Door Lock Switch Unlock Control I -
14 0.35 GY 5697 Child Security Indicator Control I -
15 0.35 PK 3290 Center Stack Reset Signal I UYS or UYX
16 0.35 WH 111 Hazard Switch Signal I -
17 0.35 BK/WH 1551 Ground I -
18 0.35 D-GN/WH 1358 DIC Switch Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.