Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A7 TO B152LRCOMPONENT CONNECTOR END VIEWSA20 RADIO/HVAC CONTROLS
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans
A20 Radio/HVAC Controls
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION A20 Radio/HVAC Controls
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13327120 | J-35616-64B (L-BU) | J-38125-215A | SAIT-A03T-M064 | 14 | P | P |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | TN | 7458 | Serial Data | I | - |
| 2 | 0.35 | YE | 7459 | Serial Data | I | - |
| 3 | 0.35 | BARE | 7460 | Drain Wire | I | - |
| 4 | 0.35 | L-GN | 3291 | Center Stack Wake - Up Signal | I | - |
| 5 | 0.35 | PU/WH | 3369 | Touch Screen Display Signal (+) | I | - |
| 6 | 0.35 | PU | 3370 | Touch Screen Display Signal (-) | I | - |
| 7 | 0.5 | BARE | 3368 | Touch Screen Display Drain Wire | I | - |
| 8 | 0.35 | YE | 7531 | Linear Interconnect Network 9 | I | - |
| 9 | - | - | - | Not Occupied | - | - |
| 10 | 0.5 | RD/WH | 3240 | Battery Positive Voltage | I | - |
| 11 | - | - | - | Not Occupied | - | - |
| 12 | 0.35 | PK/BK | 780 | Driver Door Lock Switch Lock Signal | I | without UDY |
| 13 | 0.35 | OG/BK | 781 | Driver Door Lock Switch Unlock Signal | I | without UDY |
| 14 | 0.35 | L-GN | 3364 | Navigation Display Reset Signal | I | UDY |
| 15 | 0.35 | PK | 3290 | Center Stack Reset Signal | I | - |
| 16 | 0.35 | WH | 111 | Hazard Switch Signal | I | - |
| 17 | 0.5 | BK | 1650 | Ground | I | - |
| 18 | 0.35 | WH | 7066 | Remote Enable Signal | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.