Quarter Window Regulator Motor Replacement

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Quarter Window Regulator Motor Replacement
Fig 1: Quarter Window Regulator Motor & Screws
GM2524628Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the quarter window regulator. Refer to Quarter Window Regulator Replacement .
1 Quarter Window Regulator Motor Screw (Qty:3)
CAUTION:

Refer to Fastener Caution .


Tighten 
8 N.m (71 lb in)
2 Quarter Window Regulator Motor

Procedure

  1. When installing the regulator motor ensure that the gear washer is in place.
  2. After replacing the quarter window regulator motor, it is necessary to reprogram. Refer to Window Motor Programming - Express Function .
  3. Inspect the quarter window for proper operation before securing the quarter trim.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.