Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Convertible Window Operation
All power windows can be commanded by the driver window switch, the passenger window switch only controls its respective window, the rear power windows do not have local rear window switches. The driver window switch contains the master power window switches that commands the rear power window operations. When the left rear or right rear switch is activated to a desired position, driver window switch will send a serial data message to the BCM to command the desired rear window. The BCM will then send a serial data message to rear window motor to move the window to the desired position. The all the window motors may also receive a command from the BCM to globally express down while lowering the convertible top.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.