SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM AND WASHER SYSTEMREPAIR INSTRUCTIONSWINDSHIELD WASHER NOZZLE REPLACEMENT
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Windshield Washer Nozzle Replacement

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Windshield Washer Nozzle Replacement
Fig 1: Windshield Washer Nozzle
GM2196940Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Open and support the hood.
  2. Release the hood inner panel assembly from the inner hood panel.
  3. Use a small flat-bladed tool in order to release the washer nozzle locking tab from the inner hood panel.
  4. Release the washer nozzle from the hood inner panel assembly.
1 Windshield Washer Hose Nozzle

Procedure

  1. Disengage the windshield washer hose from the windshield washer nozzle.
  2. Adjust the windshield washer nozzles. Refer to Windshield Washer Nozzle Adjustment .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.