SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL TRIM PLATE APPLIQUE REPLACEMENT - LEFT SIDE (WITH GRE)
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Instrument Panel Trim Plate Applique Replacement - Left Side (With GRE)

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Instrument Panel Trim Plate Applique Replacement - Left Side (With GRE)
Fig 1: Instrument Panel Trim Plate Applique - Left Side (With GRE)
GM2193386Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Instrument Panel Trim Plate Applique Assembly

Procedure

  1. Use a flat bladed plastic trim tool in order to release the lower edge of the applique from the instrument panel trim plate retainer.
  2. Unsnap the top edge of the applique from the instrument panel trim plate retainer.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.