SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSKEYLESS ENTRY SYSTEM AND REMOTE FUNCTIONSREPAIR INSTRUCTIONSREMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT (WITH BTV)
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Remote Control Door Lock Receiver Replacement (With BTV)

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Remote Control Door Lock Receiver Replacement (With BTV)
Fig 1: Remote Control Door Lock Receiver (With BTV)
GM2716355Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Remote Control Door Lock Receiver

Procedure

  1. Remove the receiver trim cover.
  2. Disconnect the electrical connector.
  3. Unsnap the receiver from the windshield bracket.
  4. For programming and set up, refer to Control Module References
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.