SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014CAMARO ZL1, 2D CONVERTIBLE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSCOMMUNICATION INTERFACE MODULE BATTERY REPLACEMENT
2014 Chevrolet Camaro ZL1, 2D Convertible, Standard Trans

Communication Interface Module Battery Replacement

2014 Chevrolet Camaro ZL1, 2D Convertible, Standard TransSECTION Communication Interface Module Battery Replacement
Fig 1: Communication Interface Module Battery
GM2195335Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  2. Remove the communication interface module cover, if equipped.
1 Communication Interface Module Battery

Procedure

  1. Disconnect the electrical connector.
  2. Reprogramming of the Module may be necessary after losing battery power.
  3. For programming and set up procedures, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.