Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2013TRAX LT, FWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINTERIOR/EXTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS

2013 Chevrolet Trax LT, FWD

Fastener Tightening Specifications

2013 Chevrolet Trax LT, FWDSECTION Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Brake Pedal Bracket Bolt	9 N.m	80 lb in
HVAC Module Bolt	9 N.m	80 lb in
Instrument Panel Compartment Door Latch Striker Bolt	9 N.m	80 lb in
Instrument Panel Driver Knee Bolster Inner Bracket Bolt	9 N.m	80 lb in
Instrument Panel Inflatable Restraint Module Bracket Bolt	9 N.m	80 lb in
Instrument Panel Knee Bolster Outer Bracket Bolt	9 N.m	80 lb in
Instrument Panel Knee Bolster Outer Bracket Nut	9 N.m	80 lb in
Instrument Panel Tie Bar Bolt	22 N.m	16 lb ft
Instrument Panel Tie Bar Lower Support Bracket Bolt	22 N.m	16 lb ft
Instrument Panel Tie Bar Nut	22 N.m	16 lb ft

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.