SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013TRAX LT, FWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINTERIOR/EXTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL LOWER CENTER TRIM PLATE APPLIQUE REPLACEMENT (BUICK)
2013 Chevrolet Trax LT, FWD

Instrument Panel Lower Center Trim Plate Applique Replacement (Buick)

2013 Chevrolet Trax LT, FWDSECTION Instrument Panel Lower Center Trim Plate Applique Replacement (Buick)
Fig 1: Instrument Panel Lower Center Trim Plate Applique
GM2778239Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Lower Center Trim Plate Applique Replacement (Buick)

Callout Component Name

Preliminary Procedures

  1. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement (Buick) .
  2. Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement (Buick) .
1 Instrument Panel Lower Center Trim Plate Applique Fasteners (Qty: 2)
CAUTION:

Refer to Fastener Caution .
2 Instrument Panel Lower Center Trim Plate Applique

Procedures

  1. Use a flat bladed plastic trim tool to aid in the removal of the trim plate from the instrument panel assembly.
  2. Disconnect the electrical connection.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.