Exhaust Gas Recirculation (EGR) Valve (Diesel)

2013 Chevrolet Silverado 2500 HD LT, 2D Cab Chassis, 6.6L Eng VIN 8, RWDSECTION Exhaust Gas Recirculation (EGR) Valve (Diesel)
GM2216905Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness: Engine
  • OEM: 284716-3
  • Service: 13576416
  • Description: 6-Way F 1.6 Micro-Timer II Series, Sealed (BN)
Terminal Part Information
  • Terminal/Tray: 4-964274-1/25
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: J-38125-560/J-35616-14 (GN)
Exhaust Gas Recirculation (EGR) Valve (Diesel)

Pin Wire Circuit Function
1 0.5 GY 2702 5 Volt Reference
2 0.5 L-GN/BK 5746 Exhaust Gas Recirculation Valve Motor Low Signal
3 0.5 TN 2753 Low Reference
4 - - Not Used
5 0.5 BN/WH 5763 Exhaust Gas Recirculation Valve Sensor Signal
6 0.5 OG/BK 5764 Exhaust Gas Recirculation Valve Motor High Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.