SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SILVERADO 2500 HD LT, 2D CAB CHASSIS, 6.6L ENG VIN 8, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - 1-2 SHIFT SOLENOID TO DRIVE MOTOR GENERATOR BATTERY MODULE (X3)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X3
2013 Chevrolet Silverado 2500 HD LT, 2D Cab Chassis, 6.6L Eng VIN 8, RWD

Body Control Module (BCM) X3

2013 Chevrolet Silverado 2500 HD LT, 2D Cab Chassis, 6.6L Eng VIN 8, RWDSECTION Body Control Module (BCM) X3
GM1664498
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15482791
  • Service Connector: 88988840
  • Description: 25-Way F HIT Series (L-BU)
Terminal Part Information
  • Pins: 1-3, 5
  • Terminated Lead: 13327199
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: Pins: 1-3, 5 (MEX) - E/A
  • Core/Insulation Crimp: Pin: 5 (except MEX) - C/A
  • Pins: 7-15, 16-19, 21, 22, 25
  • Terminated Lead: 13575870
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
Body Control Module (BCM) X3

Pin Wire Circuit Function
1 0.8 BK/WH 1851 Ground (MEX)
2 0.8 RD/WH 2140 Battery Positive Voltage (except HP2 or except 8S8)
0.5 RD/WH 2140 Battery positive Voltage (HP2 or 8S8)
3 0.5 RD/WH 3840 Battery Positive Voltage
4 - - Not Used
5 0.8 BK/WH 1851 Ground (MEX)
1 BK/WH 1851 Ground (except MEX)
6 - - Not Used
7 0.5 GY 728 Security Indicator Control (SPO Alarm)
8 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus (+)
9 0.5 TN 2501 High Speed GMLAN Serial Data Bus (-)
10 0.35 D-GN 5060 Low Speed GMLAN Serial Data
11 0.35 D-GN 44 Instrument Panel Lamp Dimmer Switch Signal
12 0.35 OG/WH 812 12-Volt Reference
13 0.35 L-GN 526 Stop Lamp Switch Signal
14 0.35 TN 552 Sensor Low Reference
15 0.35 GY 598 5 Volt Reference
16 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus (+)
17 0.5 TN 2501 High Speed GMLAN Serial Data Bus (-)
18 0.35 YE 6817 LED Backlight Dimming Control
19 0.35 L-BU 5986 Serial Data Communication Enable (except MEX)
20 - - Not Used
21 0.35 OG 192 Front Fog Lamp Switch Signal/Fog Lamps Enable (T96)
22 0.35 L-GN/WH 7158 Cruise Control Indicator Dimming Signal (except MEX)
23-24 - - Not Used
25 0.35 PU/WH 6816 Indicator Dimming Control (except MEX)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.